工程技术员英文自我评价
微文呈现整理的工程技术员英文自我评价（精选4篇），汇集精品内容供参考，请您欣赏。
工程技术员英文自我评价 篇1
This practice makes me deeply feel the difference between theory and practice, from now on, not only to seriously learn the theory of knowledge, but also to focus on strengthening the practical hands-on ability to make their own more comprehensive development of a comprehensive development of the project, . At the same time, engineering measurement is also a technical live, it needs to measure personnel seriously, careful, patient; team members should also work together, as far as possible in all aspects of measurement to maintain a high accuracy, the only way to efficiently complete our Of the measurement tasks.
In fact, this measurement makes me feel the deepest is the close cooperation between the players, measurement has just begun, we are a group of nine people is not clear division of labor, the results of measurement work was very slow, but we soon found Measurement work is included in all aspects, and we immediately assigned a good task, have defined their own work, such as: in the measurement of elevation, the need for two feet to help the staff in two turning points to help leveling, a classmate Responsible for adjusting the instrument and readings, and a student is responsible for correcting readings, record data, in addition, there is a student specifically responsible for data checking, so, in order to ensure that the measurement of the surveyor's work smoothly; another example: We divided into three groups, one group with a steel ruler, the other with a tape measure at the same time, there is a group responsible for processing data and drawing. In this way, we have a clear division of labor, unity and cooperation, and efficient completion of our measurement work.
In addition, the measurement work is complicated and complicated, including many details, such as selecting the datum point, marking, installing the instrument, adjusting the level, setting the level of the ruler, aiming at the target, recording data, processing the data and checking the error. So many details, to say which is more important, in fact, each aspect is very important, each step can not be errors, or it may retest, to bring unnecessary trouble measurement. To give an example: a vertical ruler, a central level of a circular level, when the ruler to try to bubble in the middle position, which is a technical live, you need to Mozhun the law can be fast and accurate to the standard foot righting , But can not arbitrarily put the ruler to the ground a stand, otherwise it will make the data deviation and need to re-test, delay measurement process. Therefore, the measurement must develop a serious and careful work attitude.
The measurement practice, but also let me understand the hardships of construction and measurement of the importance of the work. In order to ensure that internships can be completed on time, our group members get up almost at six o'clock every morning, arrive at the measuring location, place the instruments, then take turns to eat breakfast, and sometimes do not take a nap at noon , The afternoon until dark can not see the time Hou back to dinner, to stay later also stay up to the day of data processing, often to 12 o'clock in order to go to bed ... ... the whole week is so, we all Very hard. However, in my view, although a little tired, a little hard, this a few
Days is my most fulfilling days. Because in the past few days inside, I not only learned a lot of classroom learning not the measurement of knowledge, but also to develop some good habits, which for my future development will be of great help. Measurement practice is about to end, I will sum up the practice of this pros and cons, find their own shortcomings, and through future efforts to learn to make up for my shortcomings, prepare for the future career in order to achieve greatersuccess!
工程技术员英文自我评价 篇2
Four years of college, I study hard, proactive, and achieved good results, the average score in the class ranked the top five, and many essional courses among the best, such as the main course "analog electronic technology" in the whole eight classes in the first place to get good grades. But this is not my expertise, theory and practice of combining learning for the use is what I am after.
I love the application of electronic professional and put a great enthusiasm, which five years (two years of secondary school, three years of college are electronic professional), I have been 'a multi-skilled, comprehensive development' to strict demands on themselves, hard work Hard work, hard to learn, practical and systematic learning a variety of basic course knowledge, and achieved excellent results.
Professional knowledge: a solid theoretical foundation, more proficient in professional knowledge, have a strong ability to comprehend and self-learning ability to use a variety of instruments, can carry out circuit analysis, through the various courses and practice-related exercises and spare timeOften making a variety of circuits and maintenance of electrical appliances, with a certain degree of experience and hands-on ability to start the computer system maintenance and management of a variety of network architecture have a certain understanding of the windows9x / LAN maintenance and management. On the microcontroller programming has some reading and writing skills, skilled use of various software, such as: office series of office software and circuit design and protel circuit design software, dreamweaver web design software; and to the power system maintenance and management, has passed The electrical assessment and get electrician card.
Ability to work: has served as the squad leader in the class work, a strong sense of responsibility and collective sense of honor, work carefully and met with the recognition of teachers and students.
Behavior thinking: style decent, treat people sincere, can better deal with interpersonal relationships, doing things calm and stable, have a keen insight into life and strong logic analysis ability, can reasonably arrange life and work in the affairs of a good Of life rules and habits.
Other aspects: hobbies, like social activities, play, engage in production, etc., in the ball referee have some interest and ability.
Young may mean lack of experience, but young also means passion and vitality, I am confident that with their own ability and knowledge to overcome difficulties.
工程技术员英文自我评价 篇3
Since entering the university strict demands on themselves, and consciously study, and actively participate in the practice of various sports, and enhance individual comprehensive ability and all aspects of quality.
Ideology, the pursuit of advanced, pragmatic, willing to forge ahead, positive and progressive. In the school as a student cadre during the strict demands on themselves, a serious and responsible, helpful, and actively carry out student activities, enrich students life between classes, and consciously assist the class cadre, the Department of cadres planning, organizing various sports activities, have a certain ability and The enthusiasm to participate in the work. In many activities by the teacher's recognition and the recognition of students. Learning, love of professional, good grades, practical experience. I take the initiative to put into practice, and actively participate in social practice. In the work from the unfamiliar to the familiar, from a loss to be handy. On this basis, gained a lot of practical experience, establish a strong sense of responsibility, dedication, improve their language, communication, organization, work ability and the Aspects of quality. For the future in the real position of the work to establish a solid foundation, provides a strong backing.
Life, cheerful, generous, like with people, style, practical and helpful.Often participate in the activities carried out in the department, and in the activities of positive, upward, strict demands on themselves, and many times in the hospital, department, class style competition with students to achieve outstanding results.
Five years of college life, constantly enrich themselves, to enhance their own but also accurate and timely understanding of their own shortcomings and shortcomings, but I believe the future of learning life, in the practice of tempering, will avoid weaknesses, continuous improvement, Constantly improve and grow!
工程技术员英文自我评价 篇4
Since the company in August 1999 I was awarded the title of the technician to the present, has been four years time. In these four years, I have been in the operation department, by virtue of their own efforts and leadership to help, from a main duty officer promoted to the duty chief, and was promoted to the post of assistant. During this period, I have our first station of the system have a better understanding and awareness of some of the various types of accidents have a certain degree of independent analysis and processing capabilities, a technician to do a good job duties .
My major in the school of thermal and automation control professional, but in the first station to run our work is most in need of heat, electrical and other aspects of knowledge. This is for me a new challenge, but also the need for continuous learning to improve, so that their professional skills can be fully developed. So, I got some books about these areas, targeted to our system of learning, but also ask some of the old master and professionals, ask them to show up preaching. Through their own efforts and the help of colleagues, finally work pays off, my professional knowledge and professional skills have been greatly improved.
But I have a lot of knowledge about the thermal aspects of our system and are particularly interested in it and have a thorough understanding of e at the same time learn from their own, but also assume responsibility for preaching to other operational personnel. Our company's hot water network project is the use of computer monitoring system to achieve hot water production and operation of the comprehensive monitoring of the data. Its main components include the controller, input and output modules and monitoring stations. Our company has 18 sets of SCAN3000 / S9000 distributed control system (DCS), which has the functions of hot water network operation loop control, data acquisition, data communication, centralized information management And operation display functions. It is equipped with two S9000 controllers, and another 12 single-loop controller (Honewell UDC3300), as the control loop redundancy controller and emergency hand terminal. UDC as a backup hand-held device can DCS in the event of failure, the control loop to control. With easy to operate, programmable, high stability characteristics.
DCS system and UDC can achieve between the non-disturbance switch, to ensure the stability of the system operation. S9000 controller through the DVC communication port of the DMC communication circuit and single-loop controller to achieve communication; through the MGTSTA communication port and the system monitoring station communication card connected. With these control systems, usually a variety of parameters of the regulation and personnel labor will have a multiplier effect. These control systems are made up of measuring elements (temperature transmitters, pressure transmitters, differential pressure transmitters), control elements (S9000, UDC), actuators (regulators, etc.). Control flow is such that the scene collects data from a meter, the transmitter sends 4-20mA signal to the S9000 (that is often said DCS), 1-5V signal to the UDC. And then issued by the S9000 or UDC 4-20mA signal (UDC series with 250Ω resistor, 1-5V signal to 4-20mA signal) to adjust the actuator. In this process, the instrument's power supply from the two Siemens 24V DC power supply (the two power supply each other spare), the power to the distributor, and then by the electrical distribution to a primary meter power supply (the middle of electrical distribution in order to meter repair , Will not have a short circuit, and damage the DC power supply). DCS or UDC receives the signal that is displayed on the CRT or UDC own screen. DCS or UDC control signal to the impedance converter, distributor, the isolation module or isolated relay relay to the executive control.
Isolation module is through the analog signal, that is, continuous control signal 4-20mA, such as the valve opening, level control; and isolation relay is the switch signal to the DCS, such as temperature switches, pressure switches and pumps Start, stop state, etc. (plus isolation module, isolation relay is to isolate strong signals, so as not to S9000 in the loop control card burned).
During the shift, as a monitor, I assume the responsibility of the entire hot water network security and economic operation, the spirit of a high degree of concentration during work, leading the team members carefully adjust the parameters, careful analysis of the data, sum up the law, Found that equipment defects and risks, to prevent the expansion of the accident. Not only to ensure the safe operation of the hot water network, but also to the economic operation. In some parameters and equipment anomalies, can do a timely analysis, find out the reasons and report, with a certain degree of independent analysis. Usually go to work, often carefully study a variety of professional knowledge and operating procedures, and can often do a good job in the minds of various accidents expected. In the first station when various types of accidents, can be accurate and decisive for processing and scheduling, and quickly restore the normal operation of the system. During the operation of the Office of the Ministry of Operations, I not only assume the daily operation of the Department of Management, logistics, but also bear the auxiliary operational personnel to make the safe and economic operation. And the sector leaders to make the data with the economic analysis and load forecasting, to participate in the analysis of the accident, the system of technological transformation and so on. Such as: the first stop CRT display large network backwater pressure value is often high during the day and often need to turn on the water, after a few days of observation statistics, have this phenomenon, self-examination first station no problem, the analysis may be a user station exists Leak, the pressure during the day when the pressure is greater than our pipe network pipe leakage to our network.